長龍式熱回收洗碗機(XWC500/G) ④
外形尺寸:5600*1000*2150
備注:長龍式洗碗機,采用模塊電動組合式設計,功能強大,方便于不同客戶的需求;
客戶可根據自己的使用要求,廚房洗碗機的實際大小,進行定制;
加熱器功率可根據進水溫度不同進行選擇;烘干機模塊可根據清洗餐具的材質靈活掌握;本表中洗滌量以18寸快餐盤為參考量;
進水管徑:6分(20mm)
排水管徑:2寸(50mm)
進水壓力:1.055kg/㎡-1.76kg/㎡,最好為1.4kg/㎡,超過1.76kg/㎡需安裝減壓閥;
進水溫度:10-50℃
進水硬度:0.034-0.103克/升
電纜線規格:國標35平方毫米(三相四線)
0-50℃進水
Notes:
Line type dishwasher,modular smart modular design,powerful,easy to different needs of different customers;
Customers can according to their own requirements,the actual size of the kitchen dishwasher for customization;
The heater power can be selected according to different water temperature;
Dryer module can wash dishes material flexibility;
The amount of washing table with 18 inch snack plate as the reference amount;
Inlet diameter:6 points(20mm);
Drain diameter:2 inches(50mm);
Water pressure:1.055kg/㎡-1.76kg/㎡,preferably 1.4kg/㎡,over 1.76kg/㎡ valve must be installed (provided by other companies);
Water temperature:10-50℃;
Water hardness:0.034-0.103g/l;
Cable specifications:GB 35mm2(three-phase four-wire);
Intake of 0-50℃;
熱回收系列技術參數 Heat recovery series technical date | 長龍式 |
設備型號 Equipment model | XWC5000/G |
外形尺寸 Overall dimensions | 5600*1000*2150 |
用電功率 Electrec power | 0.2kw/380v |
標準配置 Standard configuration | 1、板材選用國標304#T=1.5-2.0mm; 2、核心配件選用國外進口品牌; |
性能優勢 Performance advantages | 1、將洗碗機內的水蒸氣,余熱或烘干機內的余熱回收,進行循環利用,可提高進水溫度20度左右; 2、降低能耗及烘干機內溫度顯著,提高烘干效果明顯; 3、降低投資成本,最多可節約6度電/小時。 |